中山铺地材料B1防火等级检测
防火测试项目：
防火评级，可燃性，难燃性，不燃性，燃烧释放热量，着火性，氧指数，毒性指数，产烟量，燃烧滴落物，烟密度...
测试标准有：
EN 13501-1 欧标建材防火测试
Fire classification of construction products and building elements.Classification using test data from reaction to fire
NF P 92-507 法标建材防火测试
Fire safety-building-Interior fitting materials-classificationaccording to their reaction to fire
GB 8624 建材防火等级
Classification for burning behavior. of building materials andproducts
BS 476 英标建材防火测试
Fire tests on building materials and structures.
DIN 4102 德标建材防火测试
Reaction to fire tests - Ignitability of building productssubjected to direct impingement of flame
ASTM E 84 建材表面燃烧
Standard Test Method for Surface Burning Characteristics ofBuilding Materials
GB/T 2408 塑料燃烧性能
Plastics-Determination of the burning behaviour of horizontal andvertical specimens in contact with a small-flame ignitionsource
ISO 5658-2 火焰蔓延
Reaction to fire tests —Spread of flame —Part 2: Lateral spread onbuilding andtransport products in vertical configuration
NFPA 259 建材潜热测试
Standard Test Method for Potential Heat of BuildingMaterials
ISO 9705 全尺寸房间火试验
Fire testing – full Scale Room test for surface produts
ASTM E162 火焰蔓延
Standard Test Method for Surface Flammability of Materials Using aRadiant Heat Energy Source
NES 711 燃烧烟指数
Determination of the smoke index of the products of combustion fromsmall specimens of materials
AS/NZS 3837 燃烧热值和产烟测试
Method of test for heat and smoke release rates for materials andproducts using an oxygen consumption calorimeter
AS/NZS 1530 澳标建材防火要求
Methods for fire tests on building materials components andstructures
ISO 5659-2 燃烧烟密度
Plastics- Smoke generation Part 2: Determination of optical densityby a single-chamber test
ASTM D3675 泡沫材料表面燃烧
Standard Test Method for Surface Flammability of Flexible CellularMaterials Using a Radiant Heat Energy Source
ASTM E 648 铺地材料－辐射热源法
Standard Test Method for Critical Radiant Flux of Floor-CoveringSystems Using a Radiant Heat Energy Source
ISO 5660-1 热释放速率
Reaction-to-fire tests - Heat release, smoke production and massloss rate - Part 1: Heat release rate (cone calorimetermethod)
ASTM E136 不燃性测定
Standard Test Method for Behavior. of Materials in a Vertical TubeFurnace at 750°C
